JVL...intelligent motors

The best integrated motors in the world

High power positioning in a small all-in-one package
The new integrated servo MAC083 offers 83 W / 4000RPM at 24VDC.


Motek fair | Hall 7 Booth 7514 | Stuttgart, 10.-13. October 2023


MAC083


Motek 2023

Register for your free e-ticket

Get your free ticket now, simply by registering here.

It is a great opportunity to meet JVL and discuss your application and requirements.

Book a meeting with JVL


MIS34x

ServoStepTM in size NEMA34 keeps expanding

Large variety of shaft versions: Ø9.53 mm, Ø14.0 mm, double shaft, hollow shaft and now also Ø12.7 mm.

Market leading resolution of 409600 counts/rev

Optional Ethernet protocols and possibility to daisy-chain Ethernet cables from motor to motor.

Click for more information

Click for press release


MAC320

750 W Peak in NEMA 23 size with STO

MAC320 - our new integrated servo motor fills the gap between current motor sizes

Extreme compactness and double power compared to MAC141. Same plug-in modules.

Click for more information

Click for press release


PDA072

Power Supply Optimizer

New combined power dump and 24VDC control power supply.
Has your power supply shut down during braking?
Braking produces problematic return energy.

The new power supply optimizer is designed to address this problem, by adding a built-in power dump circuit to the power cable.
It greatly improves protection of both the motor and the power supply.

  • Built-in 24 VDC control power supply for CVI when using 48-72 VDC.
  • Adapts automatically to the voltage level.
  • Easy plug-n-play, no settings needed

Click here for more information

Click for press release


MAC231

320 W Stainless Steel Servo

MAC231 - All-in-one Integrated servo motor in stainless steel and IP69K. Ideal for harsh environments.

Protected against both high pressure and high temperature washdowns.

320 W RMS power S3 with 25% duty cycle and 750 W peak. 50 Nm with optional built-in gearbox.

Click for more information

Click for press release


IO-Link

IO-Link

JVL can now also connect to IO-Link via our new IO-Link Gateway which can be used on both our MAC motor® integrated servo motors and ServoStepTM integrated stepper motors.

IO-Link is a cost effective alternative to industrial Ethernet.

For ServoStepTM you can additionally run 2-5 motors on 1 pcs IO-Link Gateway using multidrop, reducing cost even more.

Click for more information

Click for video

Click for press release



ServoStep range

ServoStepTM range

JVL supplies integrated stepper motors with closed-loop, ePLCTM, multiturn encoder and Ethernet inside.

NEMA17-43 (0.18-25Nm)

Read more about all the options in the flyer

Click for flyer

Click for more information


wireless

Industrial Wireless Ethernet

Supporting both EtherNet/IP, Profinet and ModbusTCP/UDP, JVL can now deliver wireless Ethernet for the whole range of ServoStep motors, NEMA17-43.

Set up your motors as Client or Access Point, using 2.4 GHz or 5 GHz.

To avoid cabling, use a battery for motor power. Combined with the closed-loop feature an energy saving of 93% can be reached.

Click for more information

Click for video

Click for press release



Quickguide

Quick power connection guide for MIS17-43

In just 3 minutes you get all the important information about how to connect JVL's ServoStepTM motors NEMA17-43.

You learn the basic specifications, color coding and about pitfalls to avoid.

Click for more videos

Click for MIS product page


New shafts for direct mount

New shafts for direct mount

NEMA23 motors are now available with hollow shaft or oversized shaft. Both motor types have large double row ball bearings so you can directly mount a spindle or timing belt wheel. No coupling needed.

For linear motor

Click for press release


Motorsizer

MotorSizer 4.0 sizing tool

With the free JVL software MotorSizer you can calculate and show the combinations of motors and gears that can run the application according to your specifications.

Possible types of drive set-ups include:

  • A belt driven application
  • A ball screw application
  • A rotary disc application

Click for more information

Click for press release

Click for webinar

Try MotorSizer now.
Login: demo@jvl.dk
Password: demo
Valid for 1 month or register your own account.


PSU

New series of power supplies!

The new PSU's are in general stronger, with double power and take up less cabinet space. With features such as 150% overload, over voltage, over load and over temperature protection and high efficiency.

We now offer:

  • 24 VDC power supplies with 120-1000 W output, with the option for 1 or 3 phases
  • 48 VDC range we offer power supplies with 480-1000 W output, with the option for 1 or 3 phases.
  • 72 VDC 1000 W 3 phase power supply, for high-speed applications.

Please also check out our new guide for powering your JVL motor here.

Click for more information



MAC140

3rd generation of MAC 141 W servo motor

The new generation of MAC141 offers absolute multiturn encoder based on the Wiegand principle where no battery is needed. Encoder resolution up to 8196 CPR which doubles the resolution of the previous generation MAC141.

Furthermore, increased efficiency and a cooler motor is achieved.

Optional, the motor is available with STO and protection rating up to IP65.

Click for more information

Click for press release


MAC800

MAC800 - Worlds Most Compact 750 W Integrated Servo Motor

RMS power 746 W S1 and 6.8 Nm Peak. The MAC motor® series consists of compact and efficient motors where controller, PLC, encoder, power supply and bus system are integrated in one unit. Optional industrial Ethernet, fieldbus, IP protection class, abs. multiturn encoder, brake and much more.

Click for more information

Click for press release


MAC motor range

MAC motor® range

JVL supplies integrated servo motors with ePLCTM, brake, multiturn encoder and support for all Ethernet protocols.

50-4500 Watt.

Read more about all the options in the flyer.

Click for flyer

Click for more information


MIS23 w. clamp and pin

Motor for direct mount of a timing-belt wheel

The new MIS23xx49 ServoStepTM motor features a large Ø14 shaft and double row ball bearing.

The oversized bearing allows high radial forces directly on the motor shaft - up to 5100 N.

This combination can shorten your overall design length and save you the cost of an additional bearing housing.

The ServoStepTM motor is an all-in-one unit with embedded ePLCTM and 2 port Ethernet switch.

Click for more information

Click for press release integrated motor

Click for press release spindle drives


Actuator table

New master-slave sync support

JVL now supports master-slave synchronization without external PLC. The new feature will let you quickly set up applications like lifting a load in 4 corners.

MacTalk is used to program the master motor. You can connect up to three slaves. The master automatically finds the slaves on the bus, and the master automatically configures them.

A primary benefit is the speedy setup time.

For easy control, a JVL HMI can be added to the master motor.

The new Master-slave feature is supported by all MIS Integrated ServoStepTM motors with CANopen.

Click for more information

Click for press release





JVL A/S
Bregnerødvej 127 | DK-3460 Birkerød | Denmark
sales@jvl.dk | www.jvl.dk | HQ: +45 4582 4440

If you do not wish to receive any further newsletters from JVL then click here.