Wireless protocol for all JVL Integrated ServoStep motors.
Control wireless motor through Profinet, Ethernet/IP or MODBUS TCP in station client or access point mode. Use a PLC with antenna or use wireless access point and then control the motor up to 400 m away exactly as if was wired ethernet cables. The antenna connector and wireless gateway is built into the motor for a very compact motor will uPLC 8IO and driver integrated. In other words we cut the ethernet cable and make it wireless. To save cost for multiaxis application can first motor be with wireless and rest of the motor up to 65535 be wired. They can be used in applications where wireless is a demand eg battery powered vehicle or where motor is rotating and ethernet slipring not is a viable solution. Function block for Siemens and AIO for Rockwell PLC are available for easy setup and installation
Available for all ServoStep motor sizes:
|MIS23.. (only available with axial connectors)
Example of part number: MIS232Q1WxH466
|Wireless WLAN or Bluetooth serial MODBUS RTU or MACTALK protocol
|Wireless Ethernet/IP. WLAN
|Wireless MODBUS TCP/UDP. WLAN
|Wireless Profinet. WLAN
Above just example for part numbers. All MIS and SMC66/85 are available with wireless Profinet, Ethernet IP and Modbus TCP /UDP.
Wireless motors have 8IOA, RS422 and build in switch so more wired ethernet motors can be connected.