top
Please keyin username and password:
Forgot your password
 
 
 

NEMA23 57mm Electronic Motor Brake MAB23x

 
Electronic brake for all NEMA23 motors
The electronic brake is designed to be mounted on step- and servo motors, such as the MAC050, MAC095m, MAC140 or MAC141 series of integrated servo motors. Brake can also be used on MIS231,MIS232,MIS234 series of integrated stepper motors and MST23x stepper motors without build in controller.
A high quality electro-magnetic brake is mounted inside the housing. The brake has zero backlash and no auditory noise. Holding torque can be 0,5 to 1,5Nm.
It fits on all step- and servo motors with NEMA23 57x57mm flange and optional 6.35, 8, 10 and 11mm in and output shaft.The brake is used when it is desired to hold the motor shaft fixed at power off, or when the motor is used in a vertical linear application.When 24 VDC is connected, the brake will be deactivated and the motor can turn freely. It is recommended to use the brake only as a holding brake and not as an emergency brake.
 

 

Notice that MAB23x-01/ MAB23x-02/ MAB23x-03 / MAB23x-31 / MAB23x-30 can work in oil (in and outside) because the brake are magnetic activated. Other brake models will not work in oil due to another concept.
 
Recommended torque clamping Screw 3,4 Nm (2,5077 pound-force foot [lbf*ft]), Only for MAB23.


Holding Torque
[Nm]
(Oz-In)
Input Shaft
Ø
[mm]
(inch)
Output Shaft
Ø
[mm]
(inch)
Connection IP
Current@24VDC
[Amp]
Weight
ex. cable
[kg] (lb.)
Lenght
[mm]
(inch)
Photo
MAB23X-01* 1.5
(212.417)
6.35
(0.25)
10
(0.393)
M8 incl.
5m cable
IP55/IP66*
0.45 Amp
0.45
(0.99)
Max 57
(2.244)
MAB23X-03* 1.5
(212.417)
6.35
(0.25)
6.35
(0.25)
M8 incl.
5m cable
IP55/IP66*
0.45 Amp
0.43
(0.95)
Max 57
(2.244)
MAB23X-04 1.5
(212.417)
6.35
(0.25)
11
(0.433)
M8 incl.
5m cable
IP55/IP66*
0.45 Amp
0.45
(0.99)
Max 57
(2.244)
*IP66 only +25pcs. order.
MAB23X-30 1.5
(212.417)
6.35
(0.25)
6.35
(0.25)
M8 ex.
cable
IP55
0.41 Amp
0.44
(0.97)
Max 54
(2.125)

MAB23X-31 1.5
(212.417)
6.35
(0.25)
10
(0.393)
M8 ex.
cable
IP55
0.41 Amp
0.41
(0.90)
Max 54
(2.125)

Cable for MAB23X-30 and MAB23X-31: WI1000-M8F4A05N.
MAB23X-90 0.5
(70.805)
6.35
(0.25)
6.35
(0.25)
Wire 500mm IP44
0.25 Amp
0.44
(0.97)
Max 48
(1.889)
MAB23X-91 0.5
(70.805)
6.35
(0.25)
8.0
(0.314)
Wire 500mm IP44
0.25 Amp
0.44
(0.97)
Max 48
(1.889)

 
 
Shaft reinforcement for all NEMA23 motors
The shaft reinforcement is designed for use with step and servo motors such as the MAC050,MAC095,MAC140 and MAC141 series of integrated servo motors. It fits on all NEMA23 step- and servo motors with 6.35mm shaft. The Shaft Reinforcement contains a ball bearing with an outer diameter of 35mm and an output shaft of Ø14mm. This ensures that the shaft can withstand even high radial and axial loads.
The output shaft and flange are compatible with Yaskawa/Omron SGM and SGMAH 200/400W flanges and makes it possible to replace existing motors with a MAC motor.

MAS23X-01 - 6.35
(0.25)
14
(0.551)
- IP55 0.31
(0.68)
Max 32
(1.259)



DETAILED
 
 
 

DOWNLOAD
 
 


 


 


Most popular
 

 
Visit JVL at hi Tech & Industry
1. to 3. of October 2019
 

Visit JVL at Motek
7. to 10. of October 2019
 

Visit JVL at PPMA
1. to 3. of October 2019

 

Visit JVL in Chicago
22. to 24. of October 2019

 

Visit JVL at SPS
26. to 28. of November 2019


 


JVL A/S Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Copyright © JVL A/S - All Rights Reserved.

SEO & CMS System.


HTML5 | CSS3