| NEMA17 |
NEMA17 |
NEMA17 |
NEMA17 |
| Hollow shaft with pin |
Captive |
External rolled ball screw |
Gear - Hollow shaft |
 |
 |
 |
 |
| Open spindle drive |
Integrated electric actuators with piston |
Electric actuators with open spindle |
For front-mounting on MIS17 motor |
| NEMA23 |
NEMA23 |
NEMA23 |
NEMA23 |
| Hollow shaft with pin |
Hollow shaft with clamp |
Captive |
External rolled ball screw |
 |
 |
 |
 |
| Open spindle drive |
Open spindle drive |
Integrated electric actuators with piston |
Electric actuators with open spindle |
| NEMA34 |
NEMA34 |
NEMA34 |
NEMA34 |
| External lead screw |
External rolled ball screw |
Non-captive (Electronics - IP00) |
Captive |
 |
 |
||
| Electric actuators with lead screw and POM nut |
Electric actuators with rolled ball screw |
Integrated electric actuators spindle through motor |
Integrated electric actuators with piston |
Linear Stepper Motors can dramatically reduce cost and save space. There is no coupling, no additional bearing support and no assembly work required. This not only reduce cost but also reduce failure rate due to the less number of components and more simple construction. In applications with small load ratings a linear guide is also not required. The special design and material of the nut secure long life operations.
Above versions can be delivered
- External linear actuator. Nut are mounted on lead screw.
- Captive
- Rolled ball screw, grade C7.
- Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed. (only for NEMA34, IP00)
On request
- Different pitch and stroke length
- Special nut design
- Higher IP protection
----------------------------------------------------
The JVL stepper motor linear actuator is available in non-captive, external linear and captive options. Captive and external linear are also available with integrated build in controller or driver.
They are available in a wide variety of resolutions from x mm/rev to y mm/rev. In addition to our standard configurations can we custom design this stepper motor linear actuator to meet your specific application requirements. The range come in three sizes from 42mm to 86mm square flange NEMA17,NEMA23 and NEMA34.
Typical Application:
- Precise and rapid positioning
- X-Y tables
- Optical scanning equipment
- Mechanical or acoustic measurements
- Medical valve and pump equipment
- Semiconductor handling
- Industrial Multi axis machines
- Paperhandling
- Food processing
Want to learn more about Captive and Non-captive motors? (Click here)
JVL A/S Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
