top
Please keyin username and password:
Forgot your password
 
 
 

Junction Boxes - WI1302-2AM17T01NMB

 
Junction Box for Easy Connection to ServoStep™ or MAC motor®
Plug-and-play Junction Box for standard M8-3pin sensors and devices. Just connect the Junction Box to your integrated servo or stepper motor and up to 8 local 24 VDC I/Os are available
 
Connected I/Os can be read or set from the motors embedded ePLC™ program or via Industrial Ethernet. WI1302 offers easy connection of standard 3-pin M8 connectors typically used for limit switches and home sensor. All the 8 I/Os are available on separate M8 connectors, making it extremely easy to integrate and connect MAC motor® and ServoStep™ into any machine.
 
Details:
  • Power LED
  • LEDs for easy monitoring of I/O states
  • Built-in 24 VDC supply for sensors
  • 8 x M8-3pin Female connectors
  • M12-17pin Male connector for the connection to JVL motor
  • 1 meter shielded cable
  • IP67 rated
  • Multiple mounting options
  • Automatic output supply when used with ServoStep™ or SMC 66/85 controllers
  • Output supply must be provided when used with MAC motor® - see below
 
 





 
Connections – ServoStep™ or SMC66/85
Connect sensors and other I/Os according to this diagram, where Female pins are seen from the top of the WI1302.


Connections – Ex41 Ethernet module for MAC motor®
Connect sensors and other I/Os according to this diagram, where Female pins are seen from the top of the WI1302.
NB! WI1302 cannot be used with MAC00-Ex4 modules, ONLY with MAC00-Ex41 modules.
 
If WI1302 is used together with a MAC00-Ex41 Ethernet module for MAC motor® then output supply mustbe provided in one of two ways
  • Connect external 24 VDC supply using AI2 (I/O8) or AI1 (I/O7)
  • Set the DIP switches on the Ex41 module to ON – se below
 
Dimensions
 
 
 

DETAILED





DOWNLOAD
 
 


JVL A/S Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Copyright © JVL A/S - All Rights Reserved.

SEO & CMS System.


HTML5 | CSS3