Please keyin username and password:
Forgot your password

Other Accessories

For quick, trouble-free mounting
A complete range of JVL terminal boards and cables enable units to be quickly and easily installed in any motion-control system. Terminal Boards are available for all Controllers, Drivers, etc., with clearly marked colour-coded terminals for cables up to 2.5 square mm. 2 converter units allow accommodation of other types of input signal. Cables with fitted connector can be supplied on order to required lengths.

Baseplate. For individual mounting
In situations where a 19" rack system cannot be used, all models using JVL''s standard cabinet can be mounted on a plane surface using a Baseplate. The Baseplate is a 4mm black aluminium plate which is fixed to the unit cabinet and has provision for 6 screws for mounting on a plane surface, for example inside a control cabinet.

Racks, cabinets etc.
A variety of 19" rack cabinets and desk top cabinets are available for building in JVL drivers, controllers etc. The datasheet gives full information about these units and their dimensions.

JVL terminal boards and cables
terminal boards and cables enable units to be installed in any motion-control system - quickly and easily
Controllers, Drivers - terminal Boards are available for all
Accessories of JVL terminal boards
A complete range of JVL terminal boards and cables - for quick, trouble-free mounting




JVL's latest News
Updated: 26/06-2018
Visit JVL at SPS IPC Drives in November 2018

Visit JVL at WIN EURASIA in March 2019

SPS Automation Middle East 18.-19. September 2018
New NEMA17 Integrated ServoStep Motor (MIS17xQ/S)
New NEMA23 Integrated Stepper Motor (MIS23xQ/R/S/T)

JVL Promotional Video

New NEMA23 Integrated Stepper Motor (MIS23xQ/R/S/T)

NEMA34 86mm Integrated Stepper Motor Linear Actuator

Below versions can be delivered
  • Non-Captive linear actuator with nut inside motor.
  • External linear actuator. Nut are mounted on lead screw.
  • Captive and External linear actuator can be delivered with integrated driver or controller.

Industrial Ethernet for MAC
MIS340-MIS343 QuickStep - NEMA34 Programmable Integrated ServoStep Motors with Closed-Loop, Ethernet, multiturn encoder

MIS340-343 QuickStep - Integrated Stepper Motors.
QuickStep, the Integrated Stepper Motors from JVL. A wealth of possibilities in a series of of the world´s most compact stepper motors with the higest microstepping resolution. 4 sizes are available. From 3Nm to 12Nm


JVL Industri Elektronik Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail:
Copyright © JVL Industri Elektronik - All Rights Reserved.

SEO & CMS System.