Description |
Version |
Filename |
Release Notes |
Firmware for MAC: | |||
Firmware for MAC050-141-A (28/2-2022) |
Version 9.06 |
||
|
|||
FW Release notes for MAC140..141-F and MAC400-4500 |
Version 2.27.01.00 |
Notes | |
Firmware for MAC140..141-F (13/11-2023) |
Version 2.27.01.00 |
MAC140F_v2.27.01.zip | |
Firmware for MAC400 (13/11-2024) |
Version 2.27.01.00 |
MAC400_v2.27.01.zip | |
Firmware for MAC402(DC) (13/11-2024) |
Version 2.27.01.00 |
MAC402_v2.27.01.zip | |
Firmware for MAC800 (13/11-2024) |
Version 2.27.01.00 |
|
|
Bootloader for MAC800 (15/2-2021) |
Version 1.06 |
|
|
Firmware for MAC1000 (13/11-2024) |
Version 2.27.01.00 |
|
|
Firmware for MAC1200 (13/11-2024) |
Version 2.27.01.00 |
|
|
Firmware for MAC1500 (13/11-2024) |
Version 2.27.01.00 | MAC1500_v2.27.01.zip | |
Firmware for MAC3000 (13/11-2024) |
Version 2.27.01.00 | MAC3000_v2.27.01.zip | |
Firmware for MAC3000-G (13/11-2024) |
Version 2.27.01.00 | MAC3000G_v2.27.01.zip | |
Firmware for MAC4500 (13/11-2024) |
Version 2.27.01.00 | MAC4500_v2.27.01.zip | |
Firmware for MAC modules: | |||
Firmware for MAC00-FCx modules (x/x-20xx) |
Version 3.05
(ModBus supported) |
|
|
Firmware for MAC00-FDx modules (x/x-20xx) |
Version 3.0
(Modbus supported) |
MAC00-FDx_v3_00.zip | |
Firmware for MAC00-FP modules
(x/x-20xx) |
Version 3.04
(ModBus supported)
Uses motor address
Version 3.05
(Modbus supported)
Uses dip-sw. at module
Version 2.02HS |
|
|
Firmware for MAC00-FSx modules (19/2-2019) |
Version 2.05 | MAC00-FSx_v2_05.zip | |
Firmware for MAC00-Rx modules (x/x-2019) |
Version 2.03 |
|
|
Firmware for MAC00-RxP modules (x/x-20xx) |
Version 3.01 |
|
|
Firmware for Ethernet modules: | |||
MIS17/23/34/43 and -ECx modules (12/10-23) |
Version 3.54 | MAC00-ECx_V3_54.zip | Notes |
MIS17/23/34/43 and -EIx modules (27/9-2022) |
Version 3.42 | Notes | |
MIS17/23/34/43 and -ELx modules (26/4-2022) |
Version 3.12 | MAC00-ELx_V3_12.zip | Notes |
MIS17/23/34/43 and -EMx modules (30/9-2022) |
Version 3.26 | MAC00-EMx_V3_26.zip | Notes |
MIS17/23/34/43 and -EPx modules (8/5-2023) |
Version 3.42 | MAC00-EPx_V3_42.zip | Notes |
MIS17/23/34/43 and -ESx modules (10/3-2022) |
Version 3.16 | MAC00-ESx_V3_16.zip | Notes |
Firmware for 1. generation MIS23x and SMC75: | |||
Firmware for SMC75 and MIS23x (1st gen)
|
Version 4.00
Version 4.00-CO
(CAN Open Version) |
|
|
Firmware for 2. generation MIS: | |||
Firmware for SMC66/85 and
MIS17x, 23x (2nd gen), 34x, 43x
(26/11-2024) |
Version 6.09.03.00 |
||
Encoder Firmware for
MIS17x, MIS23x (2nd gen), MIS34x, MIS43x |
Version 3.10 | SMC85-Enc_v3_10.zip |
|
Notice for owners of MacTalk:
Firmware in QuickStep motors, MAC050-MAC141 and MAC400-3000 and all MAC motor expansion
modules can be updated to the newest version from the "Update" menu in the MacTalk program.
Firmware Installation Guide:
Choose the desired firmware file above and save it in the main directory where MacTalk is installed. The file will then show up in the "Update" menu first time MacTalk is started.
Modbus:
"ModBus supported" means that the module can talk Modbus with MAC400 or MAC800 if these are
using firmware 1.35 and up which gives much faster respons in the internal communication. |