Firmware version including 3.00:
Firmware versions was in the beginning made so the dip switches were read by the software.

Dip 7-1: Node Id

Dip 8: Selection if Dip switches or Motor address should be used as Node Id.

Dip 10-9: Termination of Profibus line.

 

Dip 7-1: Was never read.

Dip 8: State are not read. Set to use motor address.

 

From now on a new version are split into 2.

1.  3.02, 3.04 etc. never reads the dipsw. 7-1 or 8 but always

2.  3.03, 3.05 etc. reads the dip sw. 8 and if requested dip 7-1.

 

Future versions: 

Next time a new version are ready to be released two versions will come up - 3.06 and 3.07 like 3.02 and 3.03.