Accessories for Quickstep Integrated Stepper Motors and SMC85 Stepper Motor Controller
|
JVL is concerned that our customers can obtain the necessary accessories from us in order to easily beeing able to build a complete motion control system. |
We therefore offer a wide range of accessories as listed below. If you do not find what you are looking for please contact us and we will do our utmost to help you. |
|
|
| QuickStep motor Accessories | Item | Protection Class | |
| PSU24-075 |
PSU24-075 PSU 24VDC/3.2A, 75W. 85-264VAC DIN Switch-mode power supply. UL/CE approved. DIN rail. HxDxW = 126x100x56mm. |
- |  |
|
PSU48-240 |
PSU48-240. PSU48VDC/5A. 240W. 100-240 VACSwitch- mode power supply. UL/CE approved. DIN rail. HxDxW = 126x100x126mm. |
- |
 |
|
PSU80-4 |
PSU80-4. PSU80VDC. 400W. 115/240 VAC power supply. 19" rack HxDxW = 128.5x171x108mm. |
- |
 |
|
USB-RS232/485-OPTO |
USB to RS232/422/485 adaptor |
- |
 |
|
RS485-USB-ATC-820 |
USB to RS485 adaptor |
- |
 |
|
RS485-M12-1-5-5 |
Programming cable RS485 for M12, 5pin 5m Only for MIS23x, MIS34x/MIS43x with Q5 option |
- |
 |
|
RS485- M12-1-17S |
Programming cable RS485 for M12, 17pin 5m Only for MIS34x/MIS43x with P6 or Ethernet Ex option |
- |
|
|
WI1000-M12xyAzzN |
M12 connector and free end x: F for female. M for male. y: No. of pins. 5=5pin. 8=8pin. zz: 05 for 5 meter. 20 for 20 meter |
IP67 1) |
 |
|
WI1025-M12F5AF5AM5A |
M12 Y-connector for CAN bus.
2xfemale 5-pin and 1x male 5pin |
IP67 1) |
 |
|
WI0034 |
PA0160 cable DSUB26 - MAC00-R4
|
- |
 |
|
WI0036 |
PA0160 cable DSUB26 - MIS, 2 x 8pin M12, for QuickStep - 1,0 m
|
- |
 |
|
WI0064 |
PA0160-24 cable DSUB26 - MIS34 - M17, for QuickStep - 1,0 m
|
- |
|
|
WP2101, WP2105, WP2120 |
Motor cable for SMC85 in housing 1, 5 and 20m M16, 6 pin with 6 wire
|
- |
|
|
SMC85-CONKIT1-PWR |
Motor connector kit M16 for SMC85
|
- |
|
|
MAB23x |
Electronic brake for NEMA23 stepper motors,
zero backlash and no auditory noise. |
- |
 |
|
PA0160-24 |
Test Box for testing and program
development with MAC and QuickStep Motors |
- |
 |
|
PA0190 |
PA0190 is a IO gateway for MACmotor and MISmotor with 17 pin M12 connectors. It can be MACmotor Industrial Ethernet modules MAC00-Ex41 or MIS34x / MIL34x motor with 17 pin M12 connector. The gateway split the 17 pin connector into 4 pcs M12 connectors with different functions.
|
IP67 |
 |
|
WI130x |
Plug and play junction boxes for standard M8 sensors and devices. Just connect the junction box to your
integrated servo or stepper motor and up to 8 local I/O’s are available with 24VDC supply. I/O’s like limit
switch or home sensor can be read or set from ePLC program or via Industrial Ethernet.
|
IP67 |
 |
|
MacTalk |
Setup, diagnostic and programming
tool for integrated stepper motors QuickStep and integrated servo motors MAC motor.
|
- |
 |
|
MacRegio |
Try for yourselves and figure out how simple the MacTalk protocol is. This tool will help you implement the protocol into your own system. See the byte sequence that is to be sent and received on the serial line. |
- |
 |
|
MACCOMM |
Active X/ OCX software driver for windows programs
for fast and easy implementation of
a QuickStep or MAC motor on
a PC with RS232, RS485 or USB interface. |
- |
 |
|
DEMO_MIS340_MAC400 |
Demo suitcase without content made for MIS340 and MAC400-D2 or similar sized motor. |
- |
 |
1) IP55 or IP67 protection class is only possible if basic QuickStep motor is the same IP class.
JVL A/S Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
