HTRG Gear Selection Chart
The chart below will aid you in selction of the right gear and motor for your application. Please contact us if you do not find what you are looking for.
|
|
Unit | HTRG05xxxxx | HTRG06xxxxx | HTRG08xxxxx | HTRG10xxxxx |
| Size - 1 stage | mm | Ø55 x 71 | Ø65 x 76 | Ø85 x 118 | - |
| Size - 2 stages | mm | Ø55 x 85 | Ø65 x 93 | Ø85 x 142 | Ø106 x 168 |
| Shaft Output | mm | Ø12 | Ø14 | Ø19 | Ø25 |
| Efficiency | % | 94 - 97 | 94 - 97 | 94 - 97 | 94 - 97 |
| Protection | IP65 | IP65 | IP65 | IP65 | |
| Torque Nominal | Nm | 12 - 20 | 18 - 30 | 40 - 70 | 100 - 170 |
| Torque Peak | Nm | 40 - 60 | 70 - 100 | 180 - 250 | 360 - 600 |
| Rated Speed | Rpm | 3300 - 4000 | 3300 - 4000 | 2900 - 4000 | 3000 - 3500 |
| Input Flange | Nema23 | Nema23 | Nema23, PAM70, 50/70 | PAM70 | |
| Recommended motors | MAC050-141 | MAC050-141 | MAC800 | MAC800 | |
| MIS23x | MIS23x | SGM-04, -08 | |||
| MST23x | MST23x | MIS34x |
JVL A/S Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
