PROFINET for JVL MAC Motor Integrated Servo Motor from 50 to 3000W
PRESS release: October 2016.
Birkerød, Denmark - JVL Industri Elektronik A/S, one of the world’s leading producers in the field of integrated servo and stepper motors, is proud to announce Profinet now being available for the entire range of servo motors, MAC50 - 3000.
Industrial Ethernet PROFINET
JVL now presents the Profinet Industrial Ethernet protocol for the complete JVL range of integrated servo motors. The Profinet protocol was originally developed by Siemens for use with their PLCs, but can also be used by other suppliers that use the Profinet interface.
The Industrial Ethernet module from JVL fits into the complete range of integrated servo motors from 50 W to 3000 W, and is a versatile module which has the ability to be upgraded with other protocols or newer versions of the same protocol at any time. Because of the upgradeability, the JVL Industrial Ethernet module is also ‘future proof' as newer versions of the protocols will always fit into the design.
Industrial Ethernet module
The JVL Profinet module is equipped with two Ethernet connectors and a built-in switch, enabling line topology without any extra expensive hardware. The JVL Profinet module has several LEDs, enabling technicians and operators to get a quick status overview. There are also opto-isolated digital I/Os embedded in the module, enabling control of extra sensors etc. without external I/O modules. This minimizes the number of devices on the net and also reduces cable costs.
All connectors are rugged M12 connectors suitable for the rough conditions in industrial environments.
Furthermore, all registers in the JVL MACmotor® are accessible via the Profinet connection, thereby enabling complete control of motor configuration and motion.
The JVL Profinet module is very easy to use and configure via a predefined setup, and is easy commissioning using the JVL MacTalk application software.
The MACmotor® sets completely new standards for the performance and size of servo controls. MAC motor matches the size of traditional servo motors without built-in controllers. This has only been possible through the use of extremely compact motors and the development of electronics and mechanics that utilise the latest technologies and manufacturing methods.
So what about vibrations and temperature? All motor electronics and mechanical parts have been specifically developed and selected to withstand the rigorous demands required by industrial use.
Power Supply and Energy Savings
Powering this motor is easy since it only requires connection of the main voltage of 24-48VDC, 115/230VAC or 3x400VAC through harsh industrial M12, M16 or M23 connectors. Control voltage for the encoder and microprocessor circuitry is 24VDC: In an emergency-stop situation, where an approved relay has cut off the main power, encoder position and other values are maintained by this control voltage.
Furthermore, highly effective switching technology is used to ensure low heat generation resulting in appreciable energy savings.
One of the big advantages of using the integrated MACmotor®s is that you do not need to install a separate servo driver or controller in a control cabinet. This gives you many subsequent advantages: Space savings in your control cabinet, saving of expensive motor and encoder cables, saving time (and money) for cabling, noise is minimized due to internal cabling, and also installation errors between driver and motor are eliminated.
In addition, service is much easier, since the motor and controller can be replaced as a single integrated unit. Hence, downtime is minimized and production is maximized.
About JVL- JVL is recognized as a world leader for its development of efficient and compact integrated motors for VAC and VDC. MACmotor series of integrated VAC servo motors (up to 4500W and 13,5kW peak), and the QuickStep integrated stepper motors (up to 25Nm). Both the servo motor and stepper motor series includes the controller, PLC, encoder, power supply and bus system integrated into one compact unit. All industrial Ethernet protocols like Profinet, EtherCAT, Ethernet/IP, Modbus TCP, Powerlink, Sercos III etc. are available. Furthermore, traditional modules like CANopen, DeviceNet, Profibus, Nano PLC, RS232/RS485/USB, Process Control can be incorporated.
JVL has more than 25 years of motion control experience and enjoys a reputation for the development of highly specialized integrated motors with industrial Ethernet and customized improvements. They work together with their customers and representatives to find an economic, yet technically advanced solution to complicated control applications.
JVL's wide selection of quality products for motion control components include: Integrated VAC and VDC Servo motors, Integrated Stepper motors, VAC Servo motor controllers, Motor drivers (Stepper, VAC and VDC), Brakes, Gears, and HMI Modules.
For further information, please contact:
JVL Industri Elektronik A/S, Bregnerødvej 127, DK-3460 Birkerød, Denmark, Tel. +45 4582 4440, E-mail: firstname.lastname@example.org, Web: www.jvl.dk
See pictures in high resolution