HWC Part Number Selector
How to generate a partnumber:
| 1 |
2 |
3 |
4 |
5 |
6 |
7 |
| HWC |
B |
R |
0 |
N2 |
H |
00100 |
1: HWC (default)
| B |
Rolled Ball Screw |
| T |
ToothBelt |
| L |
Lead Screw |
| G |
Ground Ball Screw (Only on request for OEM project) |
3: Choose guider:
| R |
Roller guider Max speed 10m/s Low friction min 0,1u, High rigidity |
| S |
Slide contect guide with nylon. High speed 5m/s Low friction 0,1u |
| B |
Ball guide single rail, High load, low friction min 0,021u, Very high rigidity |
| D |
Ball guide double rail, High load, Low friction min 0,021u, Very high rigidity |
4: Choose amount of sensors mounted:
| 0 |
No sensor mounted |
| 1 |
1 sensor PNP mounted at motor end |
| 2 |
2 sensor PNP mounted |
| 3 |
-- |
5: Choose flange:
| N2 |
Flange nema23 |
| P6 |
Flange for MAC400 |
| P8 |
Flange for MAC800 |
| M2 |
Flange nema23 reverse parallel motor mount |
| Q6 |
Flange for MAC400 reverse parallel motor mount |
| Q8 |
Flange for MAC800 reverse parallel motor mount |
6: Pitch code:
| H |
2 (0.07874) mm/rev Screw |
| P |
4 (0.15748) mm/rev Screw |
| R |
5 (0.19685) mm/rev Screw |
| W |
10 (0.3937) mm/rev Screw |
7: Stroke length:
| 00000 |
Stroke length in mm. eg. 00100 means 100 mm |
| A01 |
Special version |
JVL A/S Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
