top
Please keyin username and password:
› Forgot your password
 
 
 

Powerlink Module for MAC - MAC00-ELx


Powerlink with M12 connectors few IO. MAC00-EL4:
  • 8 pin connector for IO. Total 4x M12
  • Control and setup through Powerlink
  • Powerlink input and output. Switch built-in.
  • For built-in PLC with ( MAC400-3000 ) or HWI for MAC050-141 etc.
  • 1 digital input for enable, limit etc.
  • 1 analogue input for zero search and adjustment etc.
  • 1 digital opto-isolated output up to 15mA for In Position, Error etc.
  • Protection IP67
  • RS232 interface
Powerlink with M12 connectors many IO. MAC00-EL41:
  • 17 pin M12 connector for IO. Total 4x M12
  • Control and setup through Powerlink
  • Powerlink input and output. Switch built-in
  • For built-in PLC with ( MAC400-3000 ) or HWI for MAC050-141 etc.
  • 4 digital inputs for enable, limit etc.
  • 2 digital opto-isolated outputs up to 15mA for In Position, Error etc.
  • 2 analogue inputs for zero search or adjustment etc.
  • RS422 for encoder or pulse/direction IO
  • Protection IP67
  • RS232 interface
 

 
Ethernet POWERLINK® is a proven technology, working in real applications world­wide. It embraces standard Ethernet technology and infrastructure, uses standard CAT5 shielded cabling and does not compromise standard Ethernet frames in order to achieve its results. Ethernet POWERLINK® is a truly open technology independently managed by the Ethernet Powerlink Standardization Group (http://www.ethernet-powerlink.org). Ethernet POWERLINK® operates as a protected segment by design, and connects to a none-determin­istic Ethernet network via a gateway.
Unlike standard Ethernet, the Slot Communication Network Management ensures that only one node is accessing the network at a time. The schedule is divided into an isochronous phase and an asynchronous phase. During the isochronous phase, time-critical data is transferred, while the asynchronous phase provides bandwidth for the transmission of data that is not time-critical.
Ethernet POWERLINK® applies the same protocol technology as CANopen. It defines SDOs (Service Data Objects), PDOs (Process Data Objects) and the Object Dictionary structure to manage the parameters.
 
 

DETAILED
 


 

DOWNLOAD
 
 


JVL A/S Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Copyright © JVL A/S - All Rights Reserved.

SEO & CMS System.


HTML5 | CSS3