top
Please keyin username and password:
Forgot your password
 
 
 

Worlds Most Compact 3000 W Integrated Servo Motor

PRESS RELEASE: January 16, 2014. JVL, Birkerød, Denmark
 
 

MAC3000

JVL presents a new AC Servo Motor with built-in controller, Nano-PLC and direct AC mains supply with same capacity and length as traditional servo motors.

JVL, the European leader in the development of integrated servo and stepper motor technology, has now again developed a new and unique product in the field of integrated motor control.
JVL’s newest additions to their portfolio is a complete, high-capacity MAC motor® with rating of 3000W. The first prototype has been revealed at the German SPS/IPC/Drives 2011 exhibition in November and in 2013 the official launch took place.
MAC motor®s are complete servo systems including a high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller and Nano-PLC, as well as facilities for incorporating various control modules such as Bluetooth, WLAN, ZigBee, EtherCAT, EtherNet/IP, CANopen, DeviceNet, Profibus, Profinet, Nano PLC, RS232/RS485/USB, Process Control, etc.

New Compact Motor
The MAC motor sets completely new standards for the performance and size of servo controls. With a length of only 311.8mm for a 3000W motor with a torque of 9.55/28.6Nm at 3000rpm, this MAC motor matches the size of traditional servo motors without built-in controllers with flange 130x130mm. This has only been possible through the use of extremely compact motors and the development of electronics and mechanics that utilise the latest technologies and manufacturing methods.
So what about vibrations and temperature? As with the other integrated servo motors in the range (50-3000W), both the motor and all electronic components have been specifically selected to withstand the rigorous demands required by industrial use.

Power Supply and Energy Savings
Powering this motor is easy since it only requires connection of the main voltage of 3x400VAC through the M23 connectors. Control voltage for the encoder and microprocessor circuitry is 24VDC: In an emergency-stop situation, where an approved relay has cut-off the main power, encoder position and other values are maintained by this control voltage.
In some applications, however, this is not needed and in those cases an optional internal 24VDC supply can be used, requiring only an AC main connection.
Furthermore highly effective switching technology is used to ensure low heat generation resulting in appreciable energy savings.

Other Advantages
One of the big advantages of using the integrated MAC motor®s is that you don't need to install a separate servo driver or controller in a control cabinet. This gives you many subsequent advantages: Space savings in your control cabinet, saving of expensive motor and encoder cables, saving time (and money) for cabling, noise is minimized due to internal cabling and also installation errors between driver and motor are eliminated.
In addition, service is much easier, since the motor and controller can be replaced as a single integrated unit. Hence downtime is minimized and production is maximized.


For further information, please contact:
JVL Industri Elektronik A/S, Bregnerødvej 127, DK-3460 Birkerød, Denmark, Tel. +45 4582 4440.
E-mail: jvlnyt@jvl.dk, Web: www.jvl.dk

Download picture in high resolution

JVL's latest News
Updated: 18/11-2016
Visit JVL at SPS IPC Drives in November 2017

New NEMA23 Integrated Stepper Motor (MIS23xQ/R/S/T)

Profinet for JVL MAC Motor, Integrated Servo Motor from 50 to 3000W

Closed-Loop feature for JVL Integrated Stepper Motors

Visit JVL at Herning in October 2017

New NEMA23 Integrated Stepper Motor (MIS23xQ/R/S/T)

MotorSizer
NEMA34 86mm Integrated Stepper Motor Linear Actuator

Below versions can be delivered
  • Non-Captive linear actuator with nut inside motor.
  • External linear actuator. Nut are mounted on lead screw.
  • Captive and External linear actuator can be delivered with integrated driver or controller.

Industrial Ethernet for MAC
 
MIS340-MIS343 QuickStep - Integrated Stepper Motors

MIS340-343 QuickStep - Integrated Stepper Motors.
QuickStep, the Integrated Stepper Motors from JVL. A wealth of possibilities in a series of of the world´s most compact stepper motors with the higest microstepping resolution. 4 sizes are available. From 3Nm to 12Nm

MAC400 Integrated Servo Motor 115 to 230VAC

MAC400 - The complete solution for medium power ratings.
  • With built-in mains power supply.
  • Choose between model with or without brake.

 

MOST POPULAR

JVL Industri Elektronik Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Copyright © JVL Industri Elektronik - All Rights Reserved.

SEO & CMS System.


HTML5 | CSS3