top
Please keyin username and password:
Forgot your password
 
 
 

Powerlink Module for MAC - MAC00-ELx


Powerlink with M12 connectors few IO. MAC00-EL4:
  • 8 pin connector for IO. Total 4x M12
  • Control and setup through Powerlink
  • Powerlink input and output. Switch built-in.
  • For built-in PLC with ( MAC400-3000 ) or HWI for MAC050-141 etc.
  • 1 digital input for enable, limit etc.
  • 1 analogue input for zero search and adjustment etc.
  • 1 digital opto-isolated output up to 15mA for In Position, Error etc.
  • Protection IP67
  • RS232 interface
Powerlink with M12 connectors many IO. MAC00-EL41:
  • 17 pin M12 connector for IO. Total 4x M12
  • Control and setup through Powerlink
  • Powerlink input and output. Switch built-in
  • For built-in PLC with ( MAC400-3000 ) or HWI for MAC050-141 etc.
  • 4 digital inputs for enable, limit etc.
  • 2 digital opto-isolated outputs up to 15mA for In Position, Error etc.
  • 2 analogue inputs for zero search or adjustment etc.
  • RS422 for encoder or pulse/direction IO
  • Protection IP67
  • RS232 interface
 

 
Ethernet POWERLINK® is a proven technology, working in real applications world­wide. It embraces standard Ethernet technology and infrastructure, uses standard CAT5 shielded cabling and does not compromise standard Ethernet frames in order to achieve its results. Ethernet POWERLINK® is a truly open technology independently managed by the Ethernet Powerlink Standardization Group (http://www.ethernet-powerlink.org). Ethernet POWERLINK® operates as a protected segment by design, and connects to a none-determin­istic Ethernet network via a gateway.
Unlike standard Ethernet, the Slot Communication Network Management ensures that only one node is accessing the network at a time. The schedule is divided into an isochronous phase and an asynchronous phase. During the isochronous phase, time-critical data is transferred, while the asynchronous phase provides bandwidth for the transmission of data that is not time-critical.
Ethernet POWERLINK® applies the same protocol technology as CANopen. It defines SDOs (Service Data Objects), PDOs (Process Data Objects) and the Object Dictionary structure to manage the parameters.
 
 

DETAILED
 


 

DOWNLOAD
 
 

JVL's latest News
Updated: 18/11-2016
Visit JVL at SPS IPC Drives in November 2017

New NEMA23 Integrated Stepper Motor (MIS23xQ/R/S/T)

Profinet for JVL MAC Motor, Integrated Servo Motor from 50 to 3000W

Closed-Loop feature for JVL Integrated Stepper Motors

Visit JVL at Herning in October 2017

New NEMA23 Integrated Stepper Motor (MIS23xQ/R/S/T)

MotorSizer
NEMA34 86mm Integrated Stepper Motor Linear Actuator

Below versions can be delivered
  • Non-Captive linear actuator with nut inside motor.
  • External linear actuator. Nut are mounted on lead screw.
  • Captive and External linear actuator can be delivered with integrated driver or controller.

Industrial Ethernet for MAC
 
MIS340-MIS343 QuickStep - Integrated Stepper Motors

MIS340-343 QuickStep - Integrated Stepper Motors.
QuickStep, the Integrated Stepper Motors from JVL. A wealth of possibilities in a series of of the world´s most compact stepper motors with the higest microstepping resolution. 4 sizes are available. From 3Nm to 12Nm

MAC400 Integrated Servo Motor 115 to 230VAC

MAC400 - The complete solution for medium power ratings.
  • With built-in mains power supply.
  • Choose between model with or without brake.

 

MOST POPULAR

JVL Industri Elektronik Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Copyright © JVL Industri Elektronik - All Rights Reserved.

SEO & CMS System.


HTML5 | CSS3