Demo Programs

Demo Programs for MacTalk and MAC motors with modules MAC00-R1, MAC00-R2, MAC00-R4, MAC00-FB4 and MAC00-EW4: (zip files)

Prog-001 - Move absolut forward and backward

Prog-002 - Speed change while running

Prog-003 - Turntable - 90 deg. by input 1

Prog-004 - Input ( 1,2 ) decides 0, 90, 180 or270 degrees, rel. or absolut

Prog-005 - Test Velocity-Analogue torque

Prog-007 - Test Analog positioning

Prog-008 - Wait until input 1 = rising edge

Prog-009 - Relative Move + change velocity at position

Prog-010 - Relative Move + output at end of move

Prog-011 - Wait until Input 1 = rising edge + If greater or less than

Prog-013 - Absolut positioning and saving values in Reg1- Reg3

Prog-014 - Zero search - Type 2

Prog-015 - 64 absolut positions

Prog-016 - Home limit-Switch

Please notice that the file name extension are .MAC and in some PC is it not possible to open MACtalk when you double click on the file. If this is the case, please save the file on the hardisk and open it by right click the mouse and select "Open with MACtalk".

Demo Programs for MotoWare32 and Step Motor Controller SMC35A and SMC35B and Step Motor Indexer SMI30 and SMI31:

ANALOG.MCP

ANALOG2.MCP

DANSAC.MCP

DEMO-001.MCP

DEMO-002.MCP

FASTACC.MCP

MULTITSK.MCP

PLCINT.MCP

SCANREX1.MCP

SMC35-2A.MCP

SMIIOM.MCP