Accessories for QuickStep Integrated Stepper Motors and SMC75 Stepper Motor Controller
|
JVL is concerned that our customers can obtain the necessary accessories from us in order to easily beeing able to build a complete motion control system. |
We therefore offer a wide range of accessories as listed below. If you do not find what you are looking for please contact us and we will do our utmost to help you. |
|
|
| QuickStep motor Accessories | Item | Protection Class | |
| PSU24-075 |
PSU24-075 PSU 24VDC/3.2A, 75W. 85-264VAC DIN Switch-mode power supply. UL/CE approved. DIN rail. HxDxW = 126x100x56mm. |
- |  |
|
PSU48-240. PSU48VDC/5A. 240W. 100-240 VACSwitch- mode power supply. UL/CE approved. DIN rail. HxDxW = 126x100x126mm. |
- |
 |
|
| MAB23X-01 | Brake. 24VDC for MAC 50-141 series and QuickStep MIS23x |
IP55 1) |
 |
| MAS23X-01 |
Shaft reinforcement for NEMA 23 motors such as MAC050-141 and MIS23x Yaskawa/Omron flange and shaft |
IP55 1) |
 |
|
USB to RS485 adaptor |
- |
 |
|
|
Cable for M12, 5pin to RS485 USB. 5m |
- |
 |
|
|
M12 connector and free end x: F for female. M for male. y: No. of pins. 5=5pin. 8=8pin. zz: 05 for 5 meter. 20 for 20 meter |
IP67 1) |
 |
|
|
M12 Y-connector for CAN bus.
2xfemale 5-pin and 1x male 5pin |
IP67 1) |
 |
|
|
WI0034 |
PA0160 cable DSUB26 - MAC00-R4
|
- |
 |
|
WI0036 |
PA0160 cable DSUB26 - MIS, 2 x 8pin M12, for QuickStep - 1,0 m
|
- |
 |
|
WI0064 |
PA0160-24 cable DSUB26 - MIS34 - M17, for QuickStep - 1,0 m
|
- |
|
|
Test Box for testing and program
development with MAC and QuickStep Motors |
- |
 |
|
|
Power Dump Resistors |
- |
 |
|
|
Setup, diagnostic and programming
tool for integrated stepper motors QuickStep and integrated servo motors MAC motor.
|
- |
 |
|
|
Try for yourselves and figure out how simple the MacTalk protocol is. This tool will help you implement the protocol into your own system. See the byte sequence that is to be sent and received on the serial line. |
- |
 |
|
|
Active X/ OCX software driver for windows programs
for fast and easy implementation of
a QuickStep or MAC motor on
a PC with RS232, RS485 or USB interface. |
- |
 |
1) IP55 or IP67 protection class is only possible if basic QuickStep motor is the same IP class.
JVL A/S Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
